PDA

View Full Version : Plank and Beam Flooring



GCArch
07-08-2013, 06:24 AM
Hello All!

I work for an architectural firm in Ohio and we're working on a plank and beam style home. I have a couple questions as to the structural plank flooring. We are using a 2" tongue and groove, solid spruce wood flooring system, with beam/joists every 3'-8" O.C. (Please see attached photos)

My question is what would be the best way to reduce potential squeaking in this type of system? I've never done one before and neither has the contractor. I'm just trying to get input so that we can look at all the possible solutions and go with the one that makes the most sense.

Please feel free to ask any questions or if anything is unclear.

Thank you!

Images:
Section Image (http://i.imgur.com/kLeCb90.jpg)
Ceiling Plan Image (http://i.imgur.com/d0mAThw.jpg)

panderson03
07-08-2013, 06:59 AM
gluing the T&G down to your floor joists and using screws rather than nails to secure the T&G will go a long way toward reducing squeeks.
welcome to our forums:)

rreidnauer
07-08-2013, 07:40 AM
Another vote for construction adhesive. Tongue nailed or screwed, either way works. The glue will be doing all the work.

rocklock
07-08-2013, 12:23 PM
Screwed and glued!